Description
Digitech TSR-24 to TSR-24S
Firmware Upgrade Version 2.00
Including the 20MHz hardware-upgrade (if needed)!
No sale or delivery to countries within the European Union (EU) and the European Economic Area (EEA)!
This upgrade package includes the Digitech firmware upgrade "2.00" for the TSR-24 (TSR-24S) effects processor.
First:
Check your firmware version!!!
Switch on the unit while watching the display. The firmware version in shown there while boot up. E.g. the display shows "1.20" – that means firmware version 1.20.
If you have a lower version than 2.00 you can use this upgrade.
This upgrade works for ALL TSR-24 and TSR-24S!
Second:
Check the the cycle frequency of the main processor of your TSR-24(S)!!!
Execute these steps:
– Switch on the unit while watching the display.
– Check what is written after the firmware version.
There are 3 possibilities:
a) no trailing characters: that means you have 10MHz cycle frequency of the main processor
b) if there is written "10MHz" the main processor runs at 10MHz.
c) if there is written "20MHz" the main processor runs at 20MHz.
What you will get in this package:
A complete firmware AND hardware-upgrade to 2.00 AND to 20MHz cycle frequency with detailed installation manual in English!
This upgrade will make a TSR-24S out of any TSR-24!
If you are not sure which TSR-24(S) version you have or if you have any other problems just write us a message!
You will need a new user manual!!!
After you have upgraded to firmware version 2.00 you will need a new user manual (the manual for the TSR-24S) because the operation functions change with this software!
You can download the TSR-24S user manual for free here!!
Item Condition:
These upgrade (chips and hardware parts) are new, tested, in working condition.
More TSR-24 / TSR-24S stuff wanted?
Check out my homepage:
TSR-24(S) Webpage
Firmware-Upgrade (2.00 Upgrade) FAQs:
Q: Which benefits do I get by installing the 2.00 firmware in my TSR-24?
A: By installing the 2.00 firmware you upgrade your TSR-24 to a TSR-24S
You’ll get the following benefits:
– many new algorithms
– increased maximum delay time
– the 2.00 firmware supports the PPC-200 and PPC-210
– the 2.00 firmware supports 20MHz upgrade
– an adjustable intelligent chromatic tuner
Q: Will I lose my presets after installing the 2.00 software or the 20MHz upgrade in my TSR-24(S)?
A: Yes, because after installing you have to execute a hard reset.
If you want to keep them, consider a bulk MIDI dump or individual program dump. (I don’t know, though, if older TSR-24 programs will seamlessly load back into a TSR-24S.) Or, write down your most important settings on paper.
TSR-24S – 20MHz-upgrade FAQs:
Q: Which benefits do I get by installing 20MHz upgrade in my TSR-24S?
A: You’ll get the following benefits:
The speed increase is associated with:
– program changes
– higher multiplex speed of the 7 segment display and the LEDs
– expression controller responsiveness
– speed of response to user commands (operating system response)
– speed of boot up
– refresh rate of the display
– algorithm compilation
– etc.
This picture shows the first page of the installation manual:
